Brakes & Hubs
Keep your trailer performing safely and reliably with genuine brake and hub components from Felling Trailers. Our selection includes electric and hydraulic brake assemblies, hubs, drums, bearings, seals, and complete hub kits—everything you need to keep your trailer rolling smoothly and stopping confidently.
Each part is built for strength, precision, and long-term dependability, meeting the same quality standards we use on every Felling Trailer that leaves our factory. Whether you’re servicing a single axle or an entire fleet, you can count on our brake and hub components to deliver consistent performance on the job site or the open road.
Find the right fit for your trailer’s axle and load capacity below, and trust Felling Trailers Parts Store to keep you safely moving forward—mile after mile.
Filters
- ABS Sensors (0)
- Actuating Arms (0)
- Actuator Angle (0)
- Actuator Plate Mount (0)
- Actuator Slide Repair Kits (0)
- Adjuster Clips (0)
- Adjuster Dust Plugs (0)
- Adjuster Kits (0)
- Adjuster Levers (0)
- Adjuster Spirngs (0)
- Adjusters (0)
- Adjustment Springs (0)
- Anti-Rattle Springs (0)
- Axle (0)
- Bearing (0)
- Bleeder Screws (0)
- Brake Actuator (0)
- Brake Adjusters (0)
- Brake Adjustors (0)
- Brake Chamber (0)
- Brake Cylinders (0)
- Brake Drum (0)
- Brake Hoses (0)
- Brake Magnets (0)
- Brake Pad Kits (0)
- Brake Pads (0)
- Brake Rotorss (0)
- Breakaway Kits (0)
- Budd Cap (0)
- Caliper Assembly Kits (0)
- Caliper Rebuild Kits (0)
- Calipers (0)
- Caps (0)
- Castle Nut (0)
- Channel Mount (0)
- Coil Actuator (0)
- Collar Reel Lock (0)
- Coned Nut (0)
- Cylinders (0)
- D-Ring Pads (0)
- Dexter Axle (0)
- Drop Axle (0)
- Drum Only (0)
- Dust Covers (0)
- Electric Axle (0)
- Electric Brakes (2)
- Gasket (0)
- Glad Hands (0)
- Grease Cap (1)
- Grease Caps & Plugs (0)
- Grease Seal (0)
- Hex Nut (0)
- Hold Down Kits (0)
- Hold Down Springs (0)
- Hub & Drum Assembly (0)
- Hub & Drum Kit (0)
- Hub & Drum Only (1)
- Hub and Drum Kits (0)
- Hub Kits (0)
- Hub Only (0)
- Hydraulic Actuator (0)
- Hydraulic Actuator Mounts (0)
- Hydraulic Axle (0)
- Hydraulic Brakes (0)
- Hydraulic Drop Axle (0)
- Hydraulic Flex Hose (0)
- Hydraulic Hoses (0)
- Hydraulic Rotors (0)
- Idler Axle (0)
- Jam Nut (0)
- Light Box (0)
- Lock Nut (0)
- Lug Nut (0)
- Magnets (0)
- Mount (0)
- Mounting Bolt (0)
- O-Ring (0)
- Oil Cap (0)
- Oil Cap Kit (0)
- Oil Cap Plug (0)
- Oil Hub Plug (0)
- Oil Seal (0)
- Paddle Handle (0)
- Pistons (0)
- Plug (0)
- Pressure Gauge (0)
- Pressure Regulator (0)
- Push/Pull Valve (0)
- Race (0)
- Rear Tab (0)
- Removal/Install Tool (0)
- Reservoir Cap (0)
- Reservoir O-Ring (0)
- Return Springs (0)
- Rotors (0)
- Shoe & Lining (0)
- Spindle Nut (0)
- Spindle Washer (1)
- Spring Axle (0)
- Wheel Nut (0)
- 1.062 (0)
- 1/8" (0)
- 5/8" (0)
- 3/4" (0)
- 0.75" (0)
- 0.938" (0)
- 1" (0)
- 1-1/8" (0)
- 1.062" (0)
- 1.25" (0)
- 1.313" (0)
- 1.372" (0)
- 1.375" (0)
- 1.378" (0)
- 1.5" (0)
- 1.625" (0)
- 1.687" (0)
- 1.688" (0)
- 1.719" (0)
- 1.75" (0)
- 1.781" (0)
- 1.875" (0)
- 1.938" (0)
- 2" (0)
- 2.125" (0)
- 2.165" (0)
- 2.25" (0)
- 2.375" (0)
- 2.599" (0)
- 2.625" (0)
- 2.75" (0)
- 3.16" (0)
- 6.5" (0)
- 7" (0)
- 10" (2)
- 12" (0)
- 12-1/4" (0)
- 50mm (0)
- 0..89" (0)
- 2.615 (0)
- 3.269 (0)
- 1/16" (0)
- 0.55" (0)
- 13/16" (0)
- 7/8" (0)
- 1" (1)
- 1-1/16" (0)
- 1-1/8" (0)
- 1-5/16" (0)
- 1-1/2" (0)
- 1.086" (0)
- 1.25" (0)
- 1.5" (0)
- 1.781" (0)
- 1.957" (0)
- 1.969" (0)
- 1.979" (0)
- 1.983" (0)
- 1.986" (1)
- 1.987" (0)
- 2" (0)
- 2-1/8" (0)
- 2.24" (0)
- 2.25" (0)
- 2.312" (0)
- 2.328" (0)
- 2.332" (0)
- 2.356" (0)
- 2.361" (0)
- 2.411" (0)
- 2.44" (0)
- 2.441" (0)
- 2.45" (0)
- 2.5" (0)
- 2.51" (0)
- 2.561" (0)
- 2.563" (0)
- 2.565" (0)
- 2.688" (0)
- 2.717" (0)
- 2.72" (0)
- 2.722" (0)
- 2.875" (0)
- 2.891" (0)
- 3" (0)
- 3.0625" (0)
- 3.063" (0)
- 3.066" (0)
- 3.125" (0)
- 3.265" (0)
- 3.355" (0)
- 3.376" (0)
- 3.475" (0)
- 3.543" (0)
- 3.623" (0)
- 3.625" (0)
- 3.75" (0)
- 3.756" (0)
- 3.813" (0)
- 3.844" (0)
- 4" (0)
- 4.331" (0)
- 4.438" (0)
- 5.78" (0)
- 3.756' (0)
- 84mm (0)
5-23 - 1" Spindle Washer
The Dexter 5-23 Spindle Washer is a D-shaped washer designed for 2K–6K EZ-Lube spindles and hubs with 4–6 bolts. It ensures a secure fit and proper...
View full details46749 - Grease Cap
The Dexter 46749 Grease Cap is a drive-in style cap with a 1.986" outside diameter, designed to fit 2K to 3.5K axles. It effectively seals the hub ...
View full details8-388-80 - 6 on 5.5" Nev-R-Lube Hub & Drum Only
The Dexter 8-388-80 is a hub and drum assembly designed for light-duty 5,200–6,000 lb axles featuring Nev-R-Lube compatibility. This unit offers a ...
View full details23-473 - Electric Brake 10" x 1.5" RH
The Dexter 23-473 is a right-hand (passenger side) 10" x 1-1/2" electric brake assembly designed for 3,000 lb axles. It provides consistent braking...
View full details23-472 - Electric Brake Assembly 10" x 1-1/2"
The Dexter 23-472 is a left-hand (driver side) 10" x 1-1/2" electric brake assembly for 3,000 lb axles. It delivers reliable braking performance fo...
View full details