Brakes & Hubs
Keep your trailer performing safely and reliably with genuine brake and hub components from Felling Trailers. Our selection includes electric and hydraulic brake assemblies, hubs, drums, bearings, seals, and complete hub kits—everything you need to keep your trailer rolling smoothly and stopping confidently.
Each part is built for strength, precision, and long-term dependability, meeting the same quality standards we use on every Felling Trailer that leaves our factory. Whether you’re servicing a single axle or an entire fleet, you can count on our brake and hub components to deliver consistent performance on the job site or the open road.
Find the right fit for your trailer’s axle and load capacity below, and trust Felling Trailers Parts Store to keep you safely moving forward—mile after mile.
Filters
- ABS Sensors (0)
- Actuating Arms (0)
- Actuator Angle (0)
- Actuator Plate Mount (0)
- Actuator Slide Repair Kits (0)
- Adjuster Clips (0)
- Adjuster Dust Plugs (0)
- Adjuster Kits (0)
- Adjuster Levers (0)
- Adjuster Spirngs (1)
- Adjusters (0)
- Adjustment Springs (0)
- Anti-Rattle Springs (0)
- Axle (0)
- Bearing (0)
- Bleeder Screws (0)
- Brake Actuator (0)
- Brake Adjusters (1)
- Brake Adjustors (1)
- Brake Chamber (0)
- Brake Cylinders (0)
- Brake Drum (0)
- Brake Hoses (0)
- Brake Magnets (0)
- Brake Pad Kits (0)
- Brake Pads (0)
- Brake Rotorss (0)
- Breakaway Kits (0)
- Budd Cap (0)
- Caliper Assembly Kits (0)
- Caliper Rebuild Kits (0)
- Calipers (0)
- Caps (0)
- Castle Nut (0)
- Channel Mount (0)
- Coil Actuator (0)
- Collar Reel Lock (0)
- Coned Nut (0)
- Cylinders (0)
- D-Ring Pads (0)
- Dexter Axle (0)
- Drop Axle (0)
- Drum Only (0)
- Dust Covers (0)
- Electric Axle (0)
- Electric Brakes (0)
- Gasket (0)
- Glad Hands (0)
- Grease Cap (0)
- Grease Caps & Plugs (0)
- Grease Seal (0)
- Hex Nut (0)
- Hold Down Kits (0)
- Hold Down Springs (0)
- Hub & Drum Assembly (0)
- Hub & Drum Kit (0)
- Hub & Drum Only (0)
- Hub and Drum Kits (0)
- Hub Kits (0)
- Hub Only (0)
- Hydraulic Actuator (0)
- Hydraulic Actuator Mounts (0)
- Hydraulic Axle (0)
- Hydraulic Brakes (0)
- Hydraulic Drop Axle (0)
- Hydraulic Flex Hose (0)
- Hydraulic Hoses (0)
- Hydraulic Rotors (0)
- Idler Axle (0)
- Jam Nut (0)
- Light Box (0)
- Lock Nut (0)
- Lug Nut (0)
- Magnets (0)
- Mount (0)
- Mounting Bolt (0)
- O-Ring (0)
- Oil Cap (0)
- Oil Cap Kit (0)
- Oil Cap Plug (0)
- Oil Hub Plug (0)
- Oil Seal (0)
- Paddle Handle (0)
- Pistons (0)
- Plug (0)
- Pressure Gauge (0)
- Pressure Regulator (0)
- Push/Pull Valve (0)
- Race (0)
- Rear Tab (0)
- Removal/Install Tool (0)
- Reservoir Cap (0)
- Reservoir O-Ring (0)
- Return Springs (1)
- Rotors (1)
- Shoe & Lining (0)
- Spindle Nut (0)
- Spindle Washer (0)
- Spring Axle (0)
- Wheel Nut (0)
- 7-12 (2)
- 10 (4)
- 10-12 (7)
- 12 (5)
- 12-1/4 (21)
- 13 (1)
- 12" x 2" (4)
- 10 X 1-1/2 (3)
- 10 X 2-1/4 (42)
- 12 X 2 (65)
- 12 X 2-1/4 (1)
- 12 X 3-3/8 (2)
- 12-1/4 X 2-1/2 (6)
- 12-1/4 X 3-1/2 (2)
- 12-1/4 X 3-3/8 (24)
- 12-1/4 X 4 (14)
- 12-1/4 X 5 (10)
- 12-1/4" x 3-3/8" (2)
- 16-1/2 X 7 (1)
- 7 X 1-1/4 (7)
- 7 X 1-3/4 (5)
- 7 X 1/1-4 (3)
- 1.062 (0)
- 1/8" (0)
- 5/8" (0)
- 3/4" (0)
- 0.75" (0)
- 0.938" (0)
- 1" (0)
- 1-1/8" (0)
- 1.062" (0)
- 1.25" (0)
- 1.313" (0)
- 1.372" (0)
- 1.375" (0)
- 1.378" (0)
- 1.5" (0)
- 1.625" (0)
- 1.687" (0)
- 1.688" (0)
- 1.719" (0)
- 1.75" (0)
- 1.781" (0)
- 1.875" (0)
- 1.938" (0)
- 2" (0)
- 2.125" (0)
- 2.165" (0)
- 2.25" (0)
- 2.375" (0)
- 2.599" (0)
- 2.625" (0)
- 2.75" (0)
- 3.16" (0)
- 6.5" (0)
- 7" (0)
- 10" (0)
- 12" (0)
- 12-1/4" (0)
- 50mm (0)
- 0..89" (0)
- 2.615 (0)
- 3.269 (0)
- 1/16" (0)
- 0.55" (0)
- 13/16" (0)
- 7/8" (0)
- 1" (0)
- 1-1/16" (0)
- 1-1/8" (0)
- 1-5/16" (0)
- 1-1/2" (0)
- 1.086" (0)
- 1.25" (0)
- 1.5" (0)
- 1.781" (0)
- 1.957" (0)
- 1.969" (0)
- 1.979" (0)
- 1.983" (0)
- 1.986" (0)
- 1.987" (0)
- 2" (0)
- 2-1/8" (0)
- 2.24" (0)
- 2.25" (0)
- 2.312" (0)
- 2.328" (0)
- 2.332" (0)
- 2.356" (0)
- 2.361" (0)
- 2.411" (0)
- 2.44" (0)
- 2.441" (0)
- 2.45" (0)
- 2.5" (0)
- 2.51" (0)
- 2.561" (0)
- 2.563" (0)
- 2.565" (0)
- 2.688" (0)
- 2.717" (0)
- 2.72" (0)
- 2.722" (0)
- 2.875" (0)
- 2.891" (0)
- 3" (0)
- 3.0625" (0)
- 3.063" (0)
- 3.066" (0)
- 3.125" (0)
- 3.265" (0)
- 3.355" (0)
- 3.376" (0)
- 3.475" (0)
- 3.543" (0)
- 3.623" (0)
- 3.625" (0)
- 3.75" (0)
- 3.756" (0)
- 3.813" (0)
- 3.844" (0)
- 4" (0)
- 4.331" (0)
- 4.438" (0)
- 5.78" (0)
- 3.756' (0)
- 84mm (0)
BP07-175 - Shoe Return Spring
The BP07-175 is designed for 12" x 2" hydraulic brake assemblies and Warner 12-1/4" electric brakes. It fits Dexter and Redline single and duo serv...
View full detailsROTOR-12-DAC - Dacromet Disc Brake Slipover Rotor
The ROTOR-12-DAC is a 12" Dacromet-coated slipover disc brake rotor designed for 5,200–6,000 lb axles. It fits 6-lug idler hubs with a 6 on 5.5" bo...
View full detailsK71-679 - Brake Adjuster Kit
The Dexter K71-679 brake adjuster kit is designed for 12" x 2" Nev-R-Adjust electric brakes, ensuring consistent braking performance by maintaining...
View full detailsBP10-080 - Hydraulic Brake Adjuster 12" x 2" Brake
The BP10-080 Hydraulic Brake Adjuster is designed for 12" x 2" hydraulic drum brake assemblies. It ensures optimal brake performance by maintaining...
View full detailsBP08-120 - Adjuster Spring for Drum Style Brakes
The BP08-120 is a replacement adjuster spring for drum-style trailer brakes. It fits Dexter, Redline, Demco, and Dico 12" hydraulic brake assemblie...
View full details