Dexter Parts

The Equalizer 13-1/8" is a high-quality suspension component designed to provide even weight distribution and improve ride quality for your trailer...

Squared off directly under the round head to help prevent rotating in the hanger.  7/8"-9 Bolt Thread Pitch 4-3/4" Long Uses 6-111 Lock Nut (Sold ...

9/16" Diameter  3-1/2" Length 18 Threads per Inch Uses Lock Nut 916DLN (Sold Separately)

7/8" Diameter 9 Threads per Inch For use with 7-1-1 and 7-260-2 Bolts (Sold Separately)

9/16" HEX LOCK NUT FOR THE SUSPENSION BOLTS 9/16" Diameter 18 Threads per Inch For use with 9163B and 91635B Bolts (Sold Separately)

Replacement U-Bolt w/Nuts  3" Round U-Bolt 9/16" Diameter (2 Nuts) Used in most 6K to 7K pound axle trailers

Inner Bearing fits 25520 Race (Sold Separately) Fits most 6-8K axles as an inner bearing Also fits a 9-10k general duty axle outer bearing Inside ...

5 Leaf Slipper Spring Number of Leaves: 5 26-1/8" Length (From Center Eye to End of Slipper) 2" Wide 9/16" Eye Diameter Nylon Bushing 3.5K Capacit...

7-9K Dexter Axle Oil Cap, O-Ring, and Plug Kit   Formerly part number RG04-230

This is a replacement spring for your FT-15 and FT-16. Mounts to trailer frame with hangers or a hanger kit (sold separately) • Number of Leaves: 7...

Dexter Double Lip Grease Seal 6-7K axle, can be used in a 8K Grease Hub as well. Inside Diameter = 2.25" Outside Diameter = 3.376"  Double Lip w/ ...

NYLON BUSHING Inside Diameter of 9/16" Outside Diameter of 11/16" Length of 2"

This is a replacement spring for your FT-6, FT-10 or FT-12 5 Leaves 26-5/8" Length (from the Center of the Eye to the End of the Slipper) 2" Wide ...

U-Bolt Plate for 3" Diameter Round Axles with 9/16" U-Bolts (Axle & U-Bolts Sold Separately) Uses 9/16" Diameter U-Bolts (Sold Separately) For...

Unitized Oil Seal  2.25" Inside Diameter 3.376" Outside Diameter Fits Select 8K Axles  

Trailer Suspension U-Bolt  Axle Size: 3-1/2" Round Diameter: 9/16"-18 Length: 8" Use With: 8K Axles Nuts Included

Spring Keeper Bolt 5/16" Diameter 3-1/4" Length 18 Threads per Inch Axle Suspension Type: Leaf Spring Suspension Leaf Spring Type: Slipper Hardwar...

3.265" Outside Diameter  Matching Bearing 25580 (Sold Separately) Fits most 6-8K axles with 8 bolt hub/drum Also fits 10 General duty as a outside...

REAR HANGER FOR 2" SLIPPER SPRING 6 3/8" TALL 6-3/8" From Center of Hole to Top of Hanger Use with 2" Wide Slipper Springs Uses 5/16" Bolt (Sold S...

5/16" - 18 Hex Nut Used with 7-7 Retainer Bolt (Sold Separately) 18 Threads Per Inch Axle Suspension Type: Leaf Spring Leaf Spring Type: Slipper H...

Replacement Trailer Hub Bearing  Inside Diameter of 1.25" Outer Bearing for 5K-7K 8 Lug Hub Trailers Works with Race # 14276 (Sold Separately)

1/2" X 2.5" long, Standard on a 6-7k Axle Drum Thread Diameter: 1/2" Stud Length: 2-1/2" Spline Length: 0.68" Base Length: 1.38" Spline Diameter: ...

Round U-Bolt w/ Nuts for 5" Round Tube Axles (12-15K) Used for Axles with 5" Diameter 12-15K Axles 3/4"-10 Rod Diameter (At Threads) 5" Wide from ...

Complete RH 8K brake backer 12.25" X 3 3/8" Shoe Fits 8K-9K lb Axles w/ Cast Backing and 4 Bolt Flange For use with a 12-1/4" Inside Diameter and ...