FT-10IT-I

Replacement front main harness for drop deck and some deck over Trailers. It is 82" long and will plug into existing harnesses on trailers built af...

7K Jack, Top Wind with 4 Bolt Plate, Will come unpainted

2.5" LED AMBER MARKER LIGHT GROMMET NOT INCLUDED USE GROMMET #2008688 PREVIOUSLY WAS PART #1050026    

Inner Bearing fits 25520 Race, fits most 6-8K axles as an inner bearing, does also fit a 9-10k general duty axle outer bearing

2-1/2" Round Grommet - Flush Mount - Open Back

Hopkins Engager System. These are for our new harness's to plug right in but you can just clip the end off to make it work with older trailers. Thi...

2.5" LED RED MARKER LIGHT GROMMET NOT INCLUDED USE GROMMET #2008688 PREVIOUSLY WAS PART #1050027

This is bare beam only.  Most axles have to be ordered, figure usually about 2.5 weeks depending on order date. These are the most common axles siz...

Heavy Duty Draw Latch For Tilt Trailers, There Is Also One With A 90 Deg Handle Part# 005514

RED OVAL LED TAIL LIGHT USED WITH GROMMET #2008690 PREVIOUSLY WAS PART #1050023

Dexter Double Lip Grease Seal 6-7K axle, can be used in a 8K Grease Hub as well  ID = 2.25" OD = 3.376"    For oil bath axles use part number 10-63  

3/4" RED BULLET LIGHT WITH GROMMET PREVIOUSLY WAS PART #1050035

Solid molded construction of lens and housing creates superior durability and impact resistance

3/4" AMBER BULLET LIGHT WITH GROMMET PREVIOUSLY WAS PART #1050028

Inner Race fits Bearing #25580, Fits most 6-8K axles with 8 bolt hub/drum Also fits 10 General duty as a outside race

 License Light, Rectangular, Chrome Bracket Mount, Diamond Shell, Hardwired

Left Hand Self Adjust brake backer. What you see is what you will get. This is the easiest way to replace brakes. 6K ELECTRIC BRAKE ASSEMBLY, LH 12...

1/2" X 2.5" long, Standard on a 6-7k Axle Drum

Right Hand Self Adjust brake backer. What you see is what you will get. This is the easiest way to replace brakes. 6K ELECTRIC BRAKE ASSEMBLY, RH 1...

Replacement Trailer Hub Bearing 

Grommets help restore shock protection, security and improve vehicle appearance.

The adapter allows polarized 2-prong outlets to accept 3-prong grounded plugs.

Replaces the switch that came with your trailer break away kit. Includes cable and pull pin. Weldable, high-temp metal mounting tab. Silver contact...

Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2