Hubs / Drums

Inner Bearing fits 25520 Race (Sold Separately) Fits most 6-8K axles as an inner bearing Also fits a 9-10k general duty axle outer bearing Inside ...

7-9K Dexter Axle Oil Cap, O-Ring, and Plug Kit   Formerly part number RG04-230

Dexter Double Lip Grease Seal 6-7K axle, can be used in a 8K Grease Hub as well. Inside Diameter = 2.25" Outside Diameter = 3.376"  Double Lip w/ ...

Unitized Oil Seal  2.25" Inside Diameter 3.376" Outside Diameter Fits Select 8K Axles  

3.265" Outside Diameter  Matching Bearing 25580 (Sold Separately) Fits most 6-8K axles with 8 bolt hub/drum Also fits 10 General duty as a outside...

Replacement Trailer Hub Bearing  Inside Diameter of 1.25" Outer Bearing for 5K-7K 8 Lug Hub Trailers Works with Race # 14276 (Sold Separately)

1/2" X 2.5" long, Standard on a 6-7k Axle Drum Thread Diameter: 1/2" Stud Length: 2-1/2" Spline Length: 0.68" Base Length: 1.38" Spline Diameter: ...

10-56 OIL SEAL 3.125" Inside Diameter 4.5" Outside Diameter Fits Dexter and Hayes 10K HD, 12K, 15K Axles, & ALKO 10-12K Axles

EZ Lube Rubber Plug Fits all EZ Lube Caps Fits into Center Hole with Diameter of 1-3/16"

Grease Seal Single Lip Outer Diameter: 2.312" Inner Diameter: 1.75" 

Replacement Bearing 1.25" Inner Diameter  Matching Race 02420 (Sold Separately)

Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2 3.5K lbs Capacity 8 on 6.5" Bolt Pattern For Use wit...

Kit Includes: Oil Cap Rubber O-Ring Rubber Center Plug OIL CAP KIT COMPLETE FOR 8K ALKO/HAYES For use on 7-8K Axles Newer than 1987 Previously K...

3.125" OD Drive-In Grease Cap Replacement Grease Cap for Agricultural Hubs Outer Diameter: 3.125" Drive-In

14276 Replacement Race 2.717" Outside Diameter Matching Bearing 14125A (Sold Separately) Fits 6K & 7K Axle Capacity Trailers with 8 Bolt Hub

9-10K General Duty Unitized Oil Seal Outer Diameter: 2-7/8"  Inner Diameter: 3.88" Fits Most 10K Axle Capacity Trailers (12.25x3-3/8)

Grease Seal 10-19 2.565" Outside Diameter 1.719" Inside Diameter Double Lip w/ Tension Spring to Seal Around Spindle Fits select 3.5K Axles (Measu...

5/8"-18 Hex Flanged Style Wheel Nut 5/8-18 1-1/8" Outside Diameter Flanged Commonly used with Plate Style Wheels

8K Dexter Hub/Drum only, Races & Studs Pressed In Items Included: 25520 Inner Race (Already Pressed In)  02420 Outer Race (Already Pressed I...

Replacement oil cap for 10-16K axles 3.75" Outer Diameter Fits 10-16K Axles Includes cap, gasket, o-ring, and plug

GREASE SEAL 3.00" OD X 1.875" ID (NO.8 SPINDLE) Inside Diameter: 1.875" Outer Diameter: 3" Fits #8 Spindle

1/2" Fine Thread Cone Wheel Nut 13/16" Outside Diameter 60 Degree Coned

Oil Plug only, fits 8-15k Dexter Axles Fits Dexter Oil Hubs Does Not Fit Dexter Oil Caps

DRIVE IN STUD, 5/8" DIA 3" LONG (ALKO-HAYES) Thread Length – 2.00″ Thread Diameter – 5/8″ Stud Length – 2.90″ Spline Length – ..47″ Base Length – ...