Trailer Suspension Parts

U-Bolt Plate for 3-1/2" Diameter Round Axles (Sold Separately) Uses 9/16" Diameter U-Bolts (Sold Separately) 1-3/4" or 2" Springs 3-1/2" Round Axles

9/16" - 18- 3" WET SHACKLE BOLT W/ NUT & ZERK Bolt Dimensions 3" Length 18 Threads Per Inch

Spring Eye Bushing 1.31" Outside Diameter 9/16" Interior Diameter 2" Length

FRONT HANGER FOR 2" SLPR SPG 5" TALL 5" From Center of Holt to Top of Hanger Fits 2" Wide Slipper Springs For Use with 9/16" Bolt (Sold Separately)

9/16"-18 ZINC HEX LOCKNUT FOR SHACKLE BOLTS

Kit Includes: 1 Bolt 1 Nut 1 Zerk Trailer Suspension Wet Equalizer Bolt-Nut 7/8" x 4-5/8" Axle Suspension Type: Leaf Spring Suspension Hardware ...

REAR HANGER FOR 2" SLIPPER SPRING 5 3/8" TALL Fits 3.5K-9K Axles w/ 2" Wide Slipper Spring 5-3/8" From Center of Hole to Top of Hanger Use with 5/...

1" -8 X 5 1/2" SPG EYE BOLT FOR RUBBER BSHD 10K-15K 1" Diameter 5-1/2" Length 8 Threads per Inch Grade 5 Bolt For Use w/ Locknut 6-112 (Sold Separa...

3/4" - 16 X 3-1/2" Long Suspension Bolt w/ Nut, Zerk, and Cotter Pin Bolt Dimensions 3-1/2" Long 3/4" Diameter 16 Threads per Inch

9/16" - 18 X 3 1/2" SHACKLE BOLT W/ NUT Diameter: 9/16" Length: 3-1/2" Plain Finish Used for Slipper Spring  

1" -8 HEX LOCKNUT, 9K/10GD EQUALIZER & 10-15K SPG EYE BOLT For Use With: 10K-15K Spring Eye Bolt 7-169 9K Center Equalizer Bolt 7-182 10GD C...

3/4" ID 7/8" OD Nylon Equalizer Suspension Bushing Inside Diameter: 3/4" Outside Diameter: 7/8" Length: 1-3/4"

Rubber Spring Eye Bushing for Hayes 10K Springs Rubber w/ Steel Sleeve Outer Diameter: 1-3/4" Inner Diameter: 3/4" Length: 2-3/4"

EQUALIZER CAST 7-3/4" CURVED 9/16" FRONT & REAR HOLES  3/4" CENTER HOLE

2250 lb, 5-Leaf Double Eye Spring (Not in Kit) Nylon bushing included 1-3/4" wide spring 26" long from center eye to center eye  

  1500 lb, 4-Leaf Double Eye Spring (Not in Kit) Nylon bushing included, 9/16"ID 1-3/4" wide spring 27" long from center eye to center eye  

6000 lb 6-Leaf Slipper Spring 30" long from center of eye to end of slipper 3" wide Bushing included, 1" eye diameter Designed for 12000 lb axles

COMPLETE 3.5K SUSPENSION KIT Includes Spring Mounts, shackle straps, bolts, and nuts. This kit does not include springs, U bolts, or U bolt plates.

Center Hanger for 10GD Axles W/2 1/2" Slipper Springs 4-1/2" Tall - 1" Bolt Size 4-1/2" From Center of Hole to Top of Hanger Fits 2-1/2" Wide Spri...

Galvanized Double Eye Shackle Strap - 2-5/8" Long Width: 1-1/4" Length: 2-5/8" Finish: Galvanized

3-1/8" Galvanized Shackle Strap 9/16" Diameter Holes 3-1/8" Center of Hole Measurement 1-1/4" Wide 4-3/8" Overall Length Galvanized Finish

U-Bolt Plate for 1-3/4" or 2" Diameter Square Axles Uses 9/16" Diameter U-Bolts (Sold Separately) 1-3/4" Springs 1-3/4" or 2" Square Axles

U-Bolt Plate for 2-3/8" Diameter Round Axles Uses U-Bolt 176400 (Sold Separately) 2-3/8" Round Axles

Rubber Spring Eye Bushing for 10K General Duty Springs Rubber w/ Steel Sleeve Outer Diameter: 2" Inner Diameter: 3/4" Length: 2-5/8"