dexter

The Dexter K71-651-2 electric/hydraulic brake actuator kit is tailored for trailers with disc brakes. Delivering 1,600 psi of hydraulic pressure, t...

The Dexter K71-679 brake adjuster kit is designed for 12" x 2" Nev-R-Adjust electric brakes, ensuring consistent braking performance by maintaining...

The Dexter K71-756-00 Master Cylinder Replacement Kit is designed for drum brake actuators, providing reliable hydraulic performance. This aluminum...

The Dexter K71-777-01 Caliper Assembly Kit is designed for DB-35 disc brakes on 3,500 to 7,000 lb axles. This left-hand stainless steel caliper ens...

The Dexter K71-845-00 Oil Cap Kit is designed for 7,000 to 8,000 lb AL-KO axles manufactured after 1987. This kit includes a screw-in plastic oil c...

The Dexter K71-863-00 Vented Electric Brake Magnet Kit is designed for 8,000 to 16,000 lb AL-KO and Hayes axles equipped with electric brakes. This...

 The L44610 is a high-quality tapered roller bearing race (cup) designed for use with L44643 and L44649 bearings. Commonly found on 2,000 lb and 3,...

The L44643 is a tapered roller bearing with a 1" inner diameter, ideal for 2,000 lb trailer axles. Designed to pair with the L44610 race, it provid...

The L44649 is a tapered roller bearing featuring a 1.063" inner diameter, commonly used on 3,500 lb trailer axles. When combined with the L44610 ra...

The L68111 is a tapered roller bearing race (cup) designed for use with the L68149 bearing. Commonly found on 3,500 lb trailer axles, it provides a...

The L68149 is a tapered roller bearing with a 1.378" inner diameter, suitable for 3,500 lb trailer axles. When paired with the L68111 race, it ensu...

The LB169 Drive-In Stud is a 1/2"-20 x 1.69" replacement wheel stud designed for trailer hubs and drums. Manufactured by Dexter, this zinc-plated s...

The LB2.0 Drive-In Stud is a 1/2"-20 x 2" replacement wheel stud suitable for trailer hubs and drums. This zinc-plated stud offers enhanced durabil...

The LEGB-1 Drop Leg Jack Motor Kit is designed to convert manual single-speed jacks into electric-powered units. This 12V motor kit simplifies the ...

The LEGB-2 Electric Motor Kit transforms manual 2-speed drop leg jacks into efficient electric-powered systems. Designed for Holland and Bulldog ja...

The LG4700-30 is a heavy-duty side wind dropleg jack set with a 50,000 lb lift capacity. Featuring both single and 2-speed gearboxes, it offers ver...

The LG4700-32 is a heavy-duty, 2-speed dropleg jack designed for medium-duty trailers requiring up to 25,500 lbs of lifting capacity. Featuring a s...

The LM11910 is a high-quality tapered roller bearing race (cup) designed for use with LM11949 bearings. Commonly found on 2,000 lb to 3,000 lb trai...

The LM11949 is a tapered roller bearing featuring a 0.75" inner diameter, commonly used on 2,000 lb to 3,000 lb trailer axles. When combined with t...

The LM29710 is a tapered roller bearing race (cup) designed for use with the LM29749 bearing. Commonly found on 5,200 lb to 7,000 lb trailer axles,...

The LM29749 is a tapered roller bearing with a 1.5" inner diameter, suitable for 5,200 lb to 7,000 lb trailer axles. When paired with the LM29710 r...

The LM48510 is a high-quality tapered roller bearing race (cup) designed for use with LM48548 bearings. Commonly found on 3,500 lb trailer axles, t...

The LM48548 is a tapered roller bearing featuring a 1.375" inner diameter, commonly used on 3,500 lb trailer axles. When combined with the LM48510 ...

The LM501310 is a tapered roller bearing race (cup) designed for use with the LM501349 bearing. Commonly found on 5,200 lb to 7,000 lb trailer axle...