Deck-Over Tilt Series Trailers

Replacement Front Main Harness for Drop Deck and Some Deck Over Trailers 82" Long Plugs into Existing Harness on Trailers Built After April 2008 T...

This Pendant is a replacement for Felling Trailers after 2015. It will fit DC4309 Pumps and is for a Power Up and Down Model. This is a 4 Wire Remo...

Inner Bearing fits 25520 Race (Sold Separately) Fits most 6-8K axles as an inner bearing Also fits a 9-10k general duty axle outer bearing Inside ...

2.5" LED AMBER MARKER LIGHT GROMMET NOT INCLUDED USE GROMMET #2008688 PREVIOUSLY WAS PART #1050026    

5 Leaf Slipper Spring Number of Leaves: 5 26-1/8" Length (From Center Eye to End of Slipper) 2" Wide 9/16" Eye Diameter Nylon Bushing 3.5K Capacit...

2-1/2" Round Grommet - Flush Mount - Open Back

Pump Motor Solenoid, KTI Brand Pump DC4309 12v DC 100 AMP 4 Terminal Starter Solenoid Used for Hydraulic Dump Trailers For both Power Up and Power...

2.5" LED RED MARKER LIGHT GROMMET NOT INCLUDED USE GROMMET #2008688 PREVIOUSLY WAS PART #1050027

Dexter Double Lip Grease Seal 6-7K axle, can be used in a 8K Grease Hub as well. Inside Diameter = 2.25" Outside Diameter = 3.376"  Double Lip w/ ...

Explore our Electronic/Hydraulic Pump Power Up & Down, designed to provide seamless operation for your trailer’s hydraulic systems. This powerf...

Red Stop/Turn/Tail Light, Weathertight Connection Color: Red Diodes: 10 Mount: Grommet Connection: Weathertight, 3-Pin FMVSS: S2, T2, I6 Housing M...

2 5/16" Flat Plate Mount Coupler 4 Bolt mount 21K Does not require a hitch pin

0.75" AMBER BULLET LIGHT WITH GROMMET PREVIOUSLY WAS PART #1050028

15' extension replacement for Felling Trailers after 2015. It will fit DC4309 Pumps and is for a Power Up and Down Model. This new option allows yo...

3/4" RED BULLET LIGHT WITH GROMMET PREVIOUSLY WAS PART #1050035

 License Light, Rectangular, Chrome Bracket Mount, Diamond Shell, Hardwired

Spring Keeper Bolt 5/16" Diameter 3-1/4" Length 18 Threads per Inch Axle Suspension Type: Leaf Spring Suspension Leaf Spring Type: Slipper Hardwar...

3.265" Outside Diameter  Matching Bearing 25580 (Sold Separately) Fits most 6-8K axles with 8 bolt hub/drum Also fits 10 General duty as a outside...

Solid molded construction of lens and housing creates superior durability and impact resistance

5/16" - 18 Hex Nut Used with 7-7 Retainer Bolt (Sold Separately) 18 Threads Per Inch Axle Suspension Type: Leaf Spring Leaf Spring Type: Slipper H...

1/2" X 2.5" long, Standard on a 6-7k Axle Drum Thread Diameter: 1/2" Stud Length: 2-1/2" Spline Length: 0.68" Base Length: 1.38" Spline Diameter: ...

Replacement Trailer Hub Bearing  Inside Diameter of 1.25" Outer Bearing for 5K-7K 8 Lug Hub Trailers Works with Race # 14276 (Sold Separately)

Grommets help restore shock protection, security and improve vehicle appearance. Color: Black Mount: Recess Housing Material: Rubber Size/Shape: 6...

• Fits standard 6,000lb axle with a 5 bolt pattern on the mounting flange.• Left Hand(driver's side)• Complete assembly ready to bolt on and wire• ...