Search by Parts

This is bare beam only.  Most axles have to be ordered, figure usually about 2.5 weeks depending on order date. These are the most common axles siz...

Electric 7K Axle   93.75 Hub Face 76.00 Spring Center 4.0 Drop 2.0 Spring

Axle pictured is not the actual axle. The new axle will not come with brake chambers, will be a 10 bolt, long studs, oil bath, Meritor Big Brake Ax...

Axle pictured is not the actual axle. The new axle will not come with brake chambers, will be a 10 bolt, long studs, oil bath, Meritor Big Brake Ax...

7-9K Dexter Axle Oil Cap   Formerly part number RG04-230

Inner Bearing fits 25520 Race, fits most 6-8K axles as an inner bearing, does also fit a 9-10k general duty axle outer bearing

Unitized Oil Seal (3.376" O.D., 2.250" I.D.) 

OIL CAP KIT COMPLETE FOR 8K ALKO/HAYES PREVIOUSLY WAS PART #K363587 THIS WILL REPLACE PART #9212801 IN MOST CASES

13 1/8" OAL, 36" A/C WHEN USED W/3T3 SPRINGS A:13 1/8"long, B:5 1/2"long, C:6"long, D:9/16"diameter, E:15/16"diameter, F:3/8"diameter, Inside Diame...

U-Bolt: 3" x 9/16 x 7-1/4" - with Nuts & Lock Washers (Not in Kit)

7/8"-9 X 4.75" WET BOLT W/O NUT, W/ PRESS-IN ZERK

The regular chains have been replaced by yellow straps that go around the shocks that Limit the Travel of Suspension

18″ Long Hydraulic Brake Hose  90° 3/8-24 Male End to Standard 3/8-24 Female End For Hydraulic Disc or Drum Brakes

Complete RH 8K brake backer 12.25" X 3 3/8" Shoe

LH Complete Brake Backer Forward Self Adjust 12.25" X 3 3/8"

Brake magnet for 7.2K - 15K electric brake axles. Replaces part numbers BP01-255 and BP01-265. 

WHEEL ONLY 17.5 PLATE WHEEL BLACK 8 BOLT (WAS W17.5PWB865)

Mud flap DDI poly 10" X 12", black with no logo 

5 on 4.5" Bolt Pattern, wheel and tire combo, Load Range C, Radial Tire

Wheel and Tire Combo ST235/80/16 Load Range E

7K Jack, Top Wind with 4 Bolt Plate, Will come unpainted

25K Jost Drop Foot 2 Speed Jack with Plate welded on

Drop Deck Trailer 12K Jack, Side Pin Side Wind, With Plate

Deckover Trailer Jack 12K Drop Foot Side Wind Side Pin

Ramp spring 1.676" IS 7.5" leg

Accepts any 2" x 2" ball mount shank 1/2" reinforcing collar for increased strength Raw finish allows for immediate welding Features a pre-drilled...

DEMCO BREAKAWAY CABLE 3/32" WITH HOOKS AT BOTH ENDS

Welded tool box, 4.9 cubic foot capacity Formerly part number 2008732

Stake Pocket Hardware: Ideal for connecting a 90 degree corner on a stake body. Each set is formed from 2-1/2 in. by 3/16 in. 7 Ga stock steel and ...

Pressure equalizing and monitoring valve that is mounted between dual tires. It bolts easily to the lug, hub cap, or drive axle end. Properly mount...

7-9K Dexter Axle Oil Cap   Formerly part number RG04-230

OIL SEAL, 4.5" OD X 3.125" ID DEXTER 10-15K, ALKO 10-12K

OIL CAP KIT COMPLETE FOR 8K ALKO/HAYES PREVIOUSLY WAS PART #K363587 THIS WILL REPLACE PART #9212801 IN MOST CASES

Brake magnet for 7.2K - 15K electric brake axles. Replaces part numbers BP01-255 and BP01-265. 

OIL SEAL, 4.5" OD X 3.125" ID DEXTER 10-15K, ALKO 10-12K

OIL CAP KIT COMPLETE FOR 8K ALKO/HAYES PREVIOUSLY WAS PART #K363587 THIS WILL REPLACE PART #9212801 IN MOST CASES

Alko / Hayes 8K, 8-bolt hub/drum -9/16" studs, oil bath

SHOE/LINING FOR 9-12K AL-KO / HAYES