Suspension Components

5-1/16" Tall Rear Hanger for 2" Slipper Springs 5-1/16" From Center of Hole to Top of Hanger Fits 2" Wide Slipper Springs Uses 9/16" Bolt

3" Front Hanger for 2" Slipper Springs on 3.5-9K Axles 3-9/16" from Center of Hole to Top 9/16" Bolt Size

4" Front Hanger for 2" Slipper Springs on 3.5-9K Axles 3-9/16" from Center of Hole to Top 9/16" Bolt Size

0.91" Rear Hanger for 1-3/4" Wide Double Eye Springs w/ 9/16" Bolt Size 0.91" from Center of Hole to Top of Hanger 9/16" Hole For 1-3/4" Wide Spr...

Dexter Hanger for 1-3/4" Wide Double Eye Spring Front, Rear, or Center Position Hanger From Top to Center of Hole: 3-5/8" Uses 9/16" Bolt

Suspension 2" Slipper Spring Center Hanger - 3-1/2" Tall - 3.5-8K Axle Top to Center of Hole: 3-1/2" Bolt Size: 7/8"

Hanger for 1-3/4" Double Eye Springs w/ 9/16" Spring Eye Center of Hole to Top of Hanger: 3-1/4" Bolt Size: 9/16"

Hanger for 2" Wide Slipper Springs on 3.5-9K lb Axles 4-1/4" from Center of Hole to Top of Hanger 9/16" Bolt Hole Most Commonly Used as Front Hanger

1-1/2" Tall Front or Rear hanger 1-1/2" From Center of Hole to Top of Hanger Fits 1-3/4" Wide Springs Fits Double Eye or Slipper Springs

Trailer Axle Spring Hanger Clip - 1-3/4"  Use w/ 1-3/4" Wide Slipper Spring w/ 9/16" Spring Eye

Trailer Suspension Slipper Spring Hanger - 4-1/2" Tall Top to Center of Hole: 4-1/2" Use for 10K General Duty Axles Use w/ 2-1/2" Slipper Springs

Right Front Hanger for 10K General Duty Axles 5-1/4" From Center of Hole to Top of Hanger Fits 2-1/2" Spring Passenger's Side Uses 3/4" Bolt

Left Front Hanger for 10K General Duty Axles 5-1/4" From Center of Hole to Top of Hanger Fits 2-1/2" Wide Springs Driver's Side Uses 3/4" Bolt

Felling Mfg. Component - Gusset Front Hanger Hutch Suspension plays an essential role in reinforcing the front hanger of the suspension system, pro...

Felling Mfg. Component - Gusset Center Hanger Hutch Suspension plays an essential role in providing strength and stability to the trailer's suspens...

Suspension Equalizer - HD A=12" B=4-3/4" C=4-5/8" D=9/16" E=7/8" F=9/16" Inner Diameter=2-1/4"

Suspension Equalizer A=12" B=4-3/4" C=4-5/8" D=9/16" E=7/8" F=9/16" Inner Diameter=2-1/4"

Suspension Equalizer A=8" B=4" C=9/16" D=9/16" Inner Diameter=1-3/4"

7/8" -9 Castle Nut Inside Diameter: 7/8" Threads per Inch: 9 For use with Equalizer Bolt 7845B (Sold Separately)

1"-8 Diameter 9K Equalizer Center Bolt Diameter: 1" Length: 5" 8 Threads per Inch Grade 5 Bolt Uses Locknut 6-112 (Sold Separately)

1 1/8" -7 X 6" Equalizer Bolt (10-15K) Diameter: 1-1/8"-7 Length: 6" Grade: 5 Uses Locknut 6-72 (Sold Separately)

1" -8 X 5 1/4" Suspension Equalizer Center Bolt Size: 1"-8 Length: 5-1/4" Grade: 5 Includes Grease Zerk

1-1/8"-7 10-15K Equalizer Locknut For use with 7-170 Equalizer Bolt (Sold Separately)

Equalizer Bolt w/ Nut and Cotter Pin 7/8"-9 Diameter 4-11/16" Length Plain Finish